Speakman SE-7001 Freeze-Protected Floor-Mounted Combination Drench Shower & Eye/Face Wash

The *Speakman SE-7001 Freeze-Protected Floor-Mounted Combination Drench Shower & Eye/Face Wash* is wrapped with heat trace cable and insulation and jacketed with an easy access ABS shell to protect it to -50 degrees F. The eye/face wash features dual aerated spray outlets with automatic flow controls and flip top dust covers. The impeller action shower is activated by a high visibility yellow pull rod. An integral freeze valve protects the unit from freezing in case of a power outage. h3. Features: * Showerhead: 8” Dia. Cycolac Yellow Plastic. * Flow Control: Internal 20 GPM Regulator * Freeze Valve: Activates Automatically Below 40 Degrees F. * Valve: 1” NPTF Chrome-Plated Brass Stay-Open Ball Valve. * Activator: Powder-Coated High Visibility Yellow Aluminum Triangular Pull Rod. * Internal Stanchion: 1” IPS Galvanized Steel Pipe. * Inlet: 1” NPT Male, Top Supply. * Performance: 20 GPM @ 30 PSI * Finish: Dura-Jade Green ABS Plastic. Eye/Face Wash * Sprayhead: (2) Yellow ABS Plastic Spray Outlets with Automatic Flow Control and Flip Top Dust Covers. * Valves: ½” NPT Brass, 3-Way Chrome-Plated Ball Valve. * Performance: 3.82 GPM @ 30 PSI * Activator: Stainless Steel Push Handle. Electric * Heating Tape: Self-Limiting Parallel Resistance Cable with Braided Metal Shield. * Thermostat: Preset, Hermetically Sealed Single Pole Contact Switch. Temperature Range 60 to 70 degrees F. * Insulation: Closed Cell Rubber Foam. * Junction Box: NEMA 4 Water Tight and Dust Tight, Suitable for Indoor or Outdoor Locations. * Power Supply: 120 VAC, 60 Cycle, Single Phase. * Electrical Classification: Class 1 Division 2 GRP. B, C, D. * Ground Fault Protection: Installation will require minimum 30 mA GFPD.