Sloan EFX-200.502.0010 BASYS Active IR Sensor Faucet

h3. Description Sensor Handwashing Faucet with battery backup, double-infrared sensor activated for pre-tempered or hot and cold water operation. All serviceable components above deck for easy installation and maintenance. h3. Faucet Specifications Sensor-activated, electronic, chrome plated die cast body, handwashing faucet with the following features: * 1.5 gpm/5.7 Lpm Aerated Stream * All serviceable components above deck * One tool service * All wetted components to be stainless steel, engineered thermoplastic, EPDM, and copper or copper alloy * Solenoid housed in removable carrier that includes supply strainer, serviceable from above deck * Mechanical mixing,integral to spout, optional * Vandal resistant spray insert, key housed inside faucet body * All electronics sealed to IP-67 * Gold plated electrical contacts * Above deck individual diagnostic indicators for battery life, solenoid condition, and power up mode * Flexible, high pressure supply hoses, 3/8” compression connections * Bi-stable magnetic solenoid * Double infrared sensors with automatic setting feature * Single hole installation * Includes all mounting hardware * Selectable Sloan programmable line purge mode eliminates stagnant water * Operates from 1 to 125 psi * Adjustable run time from 0-3600 seconds (Factory set at 10 second maximum run time upon continuous detection) h3. CALGreen This BASYS faucet with a 10-second cycle uses 0.083 gallons of water at 0.5 gallons per minute (exceeds minimum CALGreen requirements) or 0.25 gallons of water at 1.5 gallons per minute, depending upon desired flow rate. Additionally, this BASYS faucet is Sloan reprogrammable to use 0.175 gallons of water at 1.5 gallons per minute with a 7-second cycle (exceeds minimum CALGreen requirements) h3. BASYS Spec Language Sloan BASYS model no. EFX-200.200.0100 double infrared sensor activated electronic handwashing faucet with battery backup and line purge mode for pre-tempered or hot/cold water supplies. Product to have double infrared sensors with automatic setting feature. Solenoid valve housed in removable carrier that closes water supply upon removal eliminating need to access control stops. Solenoid carrier includes strainer for easy above-deck service. Optional thermostatic mixer complies with ASSE 1070 requirements. h3. Legislative Compliance Federal Reduction of Lead in Drinking Water Act Law 111-380 (contains no more than 0.25% weighted average lead content), Section 116875 of the California Health & Safety Code, and Vermont Lead Reduction Law (Vermont Act 193). h3. Compliance & Certifications IAPMO/cUPC, UL (adapters), CE (adapters), Commonwealth of Massachusetts UPC, IPC, NPC Canada, California Green Building Code (CALGreen), City of Los Angeles Water Efficiency Ordinance ASME A112.18.1/CSA B125.1, NSF 372, ANSI/UL 1951, ICC/ANSI 117.1 ASME A112.18.1/CSA B125.1, NSF 372, ANSI/UL 1951, ICC/ANSI 117.1