Bradley S19-320C Flow Switch Alarm & Light System (with Cord 12')

The *Bradley S19-320C Flow Switch Alarm and Light System* can be easily connected to most combination drench shower/eyewash or drench shower units which have 1-1/4" NPT inlet piping and a 30 GPM water inlet source. If fixture is top-supplied, adequate space must be provided for vertical orientation of sensor. Consult installation manual for specific requirements. For model S19-310PVC the flow switch must be mounted horizontally. Flow switches are constructed of brass and should be protected from corrosive elements by being concealed behind a wall, in a cabinet, or other means. Strobe light, flow switch and alarm horn are U.L. listed components. The flow = switch is a CSA approved component. System is fully grounded and electrically insulated from water piping for safety. Remote location hookup possible by using the contacts in the flow switch junction box. *Horn Sound* Externally adjustable from 78–103 decibels at 10 feet (123 decibels at 1 foot). Designed to sound away from the injured person. *On/Off Switch* The horn can be turned off while the strobe light continues to flash and the water flows. *Strobe Light* Light intensity is 258,000 max. effective candela on horizontal axis. Safety amber colored glass. Dust cover. All solid state components with no moving parts for maintenance-free operation. *Voltage* AC, 120 volts (220/240 volts available in a separate unit at additional cost), 50/60 hz, single phase. System is fully grounded and electrically insulated from water piping for safety. Draws 1-3/4 amps. *Flow Switch Assembly* Watertight and completely assembled for easy hookup to alarm assembly. *Flow Switch* AC, 120/240V, 5 amps, double pole, double throw. *Electrical Connection* Pre-wired, 12-foot, multiple conductor, quick-connect, waterproof cable for easy connection to the alarm assembly. *Remote Wiring* Remote location hookup possible by using contacts in the flow switch junction box. *Pipe Size* 1-1/4" NPT supply.